Premium ALESSA, Instructions For Use Manual

Page: 9 / 61

Illustration 2
Illustration 3
3.2. MOUNTING OF HANGER SCREWS ON THE WALL
Attach the mounting template, which comes out of the mounting accessories, to the surface where the
cooker hood will be hanged, according to the appropriate height that should be from the surface of the
cooker. For JOYS-OLIVERA (Illustration 4.a), ALESSA (Illustration 4.b), ENZO (Illustration 4.c) and REMO
(Illustration 4.d) models drill with an auger of Ø8mm from the places indicated by A, B, C, D marks. Bang the
dowels of 8mm, which came out of mounting accessories, to these holes with the help of a hammer, without
damaging the dowels, and tighten these dowels with 2 hanger screws of 4x40 YHB, which again came out of
mounting accessories, in a way that the head of the screw will be left out about 6-8mm (Illustration 6).