Premium ALESSA, Instructions For Use Manual

Page: 18 / 61

5. REPLACEMENT OF LAMPS
5.1. REPLACEMENT OF LED LAMPS
The lamp of the same type should be used for lamp replacement.
To change the lamp, first disconnect the electrical connection of your device. Remove the aluminum filters
from their places. Disconnect the socket cable connection of the led lamp (Illustration 16). Disjoint the LED
lamp by pressing the connection indicated by the arrows (Illustration 17). Mount the LED lamp that can be
supplied from authorized services by applying the opposite of the same processes. Check that the lamps
work. Do not damage your device during the replacement.
Illustration 16
Illustration 17
6. MAINTENANCE and CLEANING
Cut off the electric connection of the cooker hood before starting maintenance and cleaning.
Wait for the cooker hood to cool before starting maintenance and cleaning.
Cleaning and maintenance should be carried out at regular intervals (at most in every 2 months) for the
performance and service life of your device.
The oils accumulated inside of your device and in the chimney increases the risk of fire.
Soften the dried dirts with a damp cloth, do not scrape off.
The performance of your device will decrease due to the oil and dirt accumulation of the aluminum filters.
Aluminum filters should be washed with a soapy hot water or at 60ºC in a dishwasher per month. The
surface of the filter can change color. This does not affect the performance, replacement is not necessary.
When washing in the dishwasher, place the filters in the dishwasher without tightening them. Aluminum
surfaces may become deformed in tightened conditions.
After washing the aluminum filters, do not mount to their places without drying them.
Carbon filters should never be washed. Carbon filters should be replaced on average every 6 months.
There is a risk of damage due to moisture penetration to the electronic. Never clean the control elements
with damp cloth.