Attach (E) Bearing Supports to Glider Base
Bearing Arms using four 2 1/2" Screws on each side.
**Be sure to match all letters and/or numbers**
Attach Armrest Assemblies to each side.
Assembly order is: Washer - Armrest Assembly - Washer - Large Nut
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
Attach (J) Lintels to each side using 2" Screws.
**Be sure to match all letters and/or numbers**
Attach (A) Seat Assembly to (B) Back Assembly
using six 2 1/2" Bolts. Use two bolts in center
supports and one in top hole per outside supports.
**Be sure to match all letters
and/or numbers**
Slide assembled Seat & Back between Armrests
and install 4" Bolts in back upright and bottom
hole of seat assembly on each side.
**Be sure to match all letters and/or numbers**
Attach seat to front leg using 3" Bolts.
Attach Armrest to back support using 2 1/2"
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
Premium Poly Patios - Poly Lumber Furniture
www.Poly-Lumber-Furniture.com
