A
C
d
x2
F
T20
b
x2
D
E
I
T20
b
x2
I
E
E
LOOSEN (do not fully remove) 2 SLAT
SCREWS ON ONE SIDE
1.
Attach Part C to Part F by inserting
Hardware d into the pre-drilled holes and
rotating Part C clockwise, stopping when the
assembly is tight
3.
Place Part D into the pre-cut
slot and attach it using Hardware b
Please read entire instructions
before beginning
4.
Repeat Steps 1-2 for Parts B, C,
G & D
2.
Repeat Step 1 with Part A
5.
Loosen 2 of the seat slat screws
on one side of part E. Spread the
side rails of part E to insert the
bottom tenons of part I into their
slots as shown. Re-tighten the 2
screws in part E.
6.
Use 1of hardware b on each side
to fasten part I to part E.
3
CO-0400 Assembly
1-877-904-1234
www.Poly-Lumber-Furniture.com
