Premio RC0-6111E, User Manual

Page: 19 / 135

RCO- 6100 Series l User’s Manual
19
1.3.3 RCO-6122
RCO-6122-4L(P)
RCO-6122-4L(P)-M12
RCO-6122-D10G
Front Panel
ATX power on/off switch
Press to power-on or power-off the system
Reset switch
Press to reset the system
USB 3.2 Gen 2 port (10 Gbps)
Used to connect USB 3.2 device
USB 3.2 Gen 1 port (5 Gbps)
Used to connect USB 3.2 device
AT/ATX mode select switch
Used to select AT or ATX power mode
Clear CMOS
Used to clear CMOS
SIM card
Used to insert SIM card
COM port
COM1 ~ COM4
support RS232/422/485 serial device
Line-out
Used to connect a speaker
Mic-in
Used to connect a microphone
Universal I/O Bracket
Used to customized I/O output
SSD/HDD port
Removable 2.5" SATA HDD Bay
(support H=7mm,hot-swappable,
Support RAID 0,1,5,10
Internal 2.5" SATA HDD Bay(support H=9mm)
Power LED
Indicates the power status of the system
HDD LED
Indicates the status of the hard drive
Watchdog LED
Indicates the status of the watchdog active
GPIO LED
Indicates the status of the customer define
Ethernet LEDs
Indicates the status of the LAN active
Antenna hole
Used to connect an antenna for optional
Mini-PCIe WiFi module
LAN Port
Used to connect the system to a local area
network
PoE Port
Used to connect the system to a local area
network with power over Ethernet
M12 LAN Port
Used to connect the system to a local area
network (RCO-6122-4L-M12 Only)
M12 PoE Port
Used to connect the system to a local area
network with power over Ethernet
(RCO-6122-4P-M12 Only)
D10G Port
Used to connect the system to a local area
(RCO-6122-D10G Only)
Chapter 1: Product Introductions