CT-XSL01 | User’s Manual
3.2.2 Psuedo Code
Enter_Config
Select Logical Device: 8
Set WDT Time Unit (Second Unit)
Set WDT Time Value
Exit_Config
34
Chapter 3: Features & Interface
Step1: outportb(0x2e, 0x87);
Step2: outportb(0x2e, 0x87);
Step1: outportb(0x2e, 0x07);
Step2: outportb(0x2e, 0x07);
Step1: outportb(0x2e, 0xf0);
Step2: buf2 = inportb(0x2f) & 0xf4;
//clear "Select Watchdog Timer I count mode"
Step3: buf2 |= 0x02;
//Enable the Watchdog Timer I output low pulse to
the KBRST# pin
Step4: // buf2 |= 0x08;
//Bit3 = (1:Minute Mode/0:Second Mode)
Step5: outportb (0x2f, buf2);
//Write back
Step1: outportb (0x2e, 0xf1)
Step2: outportb (0x2f, Time)
//Set watch dog time value
//Set watch dog time value
Step1: outportb(0x2e, 0xaa);
Summary of Contents for CT-XSL01 Series
