![background image](http://html1.mh-extra.com/html/premio/ct-xsl01-series/ct-xsl01-series_user-manual_1596697029.webp)
CT-XSL01 | User’s Manual
29
2.3 Jumpers Definition
When setting the jumpers, ensure that the jumper caps are placed on the correct pins.
When the jumper cap is placed on both pins, the jumper is
short
. If you remove the
jumper cap, or place the jumper cap on just one pin, the jumper is
open
. Refer to below
for examples of the 2-pin and 3-pin jumpers when they are short (on) and open (off).
List of Jumpers
Connectors Location
Definition
JLVDS2
Backlight Power Select Header
JPSON1
AT / ATX Mode Select Header
CLCMOS1
Clear CMOS Select Header
JSATA1
Mini PCI-Express / mSATA Select Header
1 2
Open
1 2
Short
Two-Pin Jumpers
1 2 3
Pins 1 and 2 are
short
1 2 3
All pins are open
1 2 3
Pins 2 and 3 are
short
Three-Pin Jumpers
Chapter 2: Jumper & Connectors
Summary of Contents for CT-XSL01 Series
