P-12
RECORDING FROM CD PLAYER
1.
Slide the FUNCTION switch to “CD/MP3” position.
2.
Put a CD/MP3 disc into CD compartment with the label side upward.
3.
Insert a cassette into CASSETTE COMPARTMENT and press the PAUSE of
button
cassette deck.
4.
Press RECORD and PLAY
button
simultaneously for recording stand-by. With the built-
in ALC, the best recording quality is adjusted automatically.
5.
Activate the CD player playing in a desired track as described in the COMPACT DISC
PLAYER OPERATION section. Release the PAUSE
button
of the cassette deck to start
recording.
6.
To stop recording temporarily, press the PAUSE
button
. To continue recording, press
the PAUSE
button
again.
7.
Press STOP/EJECT
button
of the cassette deck to stop recording. Then stop CD
playback by pressing the CD STOP
button
of the CD player.
USB OPERATION
IMPORTANT NOTE:
This unit supports most of the common MP3 interface but not 100% because there are too
many different formats keep on changing in the market.
1.
Slide the FUNCTION switch to “CD/MP3” position.
2.
Press CD/SD/USB button once
; LCD DISPLAY will show “USB”
indicator.
Remarks:
When there has no MP3 Player or Flash drive connecting to USB PORT, LCD
DISPLAY will show “
”.
3.
Insert USB plug of an Auxiliary unit (e.g.: Portable MP3 Player or Flash Drive) into the
USB PORT in this unit, total number of music will be shown on LCD
DISPLAY.
4.
Press CD PLAY/PAUSE button to play the music.
5.
Operate all CD control buttons as mentioned in above section
“PLAYING MP3 DISC”; they have same function and operation method.
6. To exit from USB playback mod
e press CD/SD/USB b
utton again. It will go back to CD
Disc mode again.
P-13
SD/MMC CARD PLAYBACK
IMPORTANT NOTE:
This unit supports most of the common MP3 interface but not 100% because there are too
many different formats keep on changing in the market.
1.
Slide the FUNCTION SWITCH to “CD/MP3” position.
2.
Press the CD/SD/USB BUTTON once, LCD DISPLAY will show
“CARD” indicator.
Remarks: When there has no SD/MMC card inside the CARD
SLOT, LCD DISPLAY will show “no”.
3.
Insert a SD/MMC card into the SD/MMC CARD SLOT, total number of music will be
shown on the LCD DISPLAY.
4.
Press the CD PLAY/PAUSE BUTTON to start playing the music.
5.
Operate all the CD control buttons same as mentioned in
above section “PLAYING MP3 DISC”, they have same function
and operational method.
6.
To exit from the SD/MMC CARD playback mode, press the CD/SD/USB BUTTON twice.
It will go back to CD Disc mode again.
REMOTE CONTROL OPERATION
Installing Batteries
Install two “AA” (UM - 3) size batteries into the battery compartment of the remote
controller.
Battery Replacement
When batteries become weak, the operating distance of the Remote Controller is greatly
reduced and you will need to replace the batteries.
Using the Remote Controller Correctly
!
Point the Remote Controller to the REMOTE SENSOR locates near to the LCD
DISPLAY.
!
The function of the buttons are the same as the corresponding control on the main
unit but some have a dual function depending on if CD or RADIO is being used.
!
When there is a strong ambient light source, the performance of the infrared
REMOTE SENSOR may be degraded, causing unreliable operation.
The recommended effective distance for remote operation is about 5 metres