P-10
3.
For interruption while MP3 disc is playing press CD PLAY/PAUSE
button
once. The
play indicator “
!
” will blink continuously on LCD DISPLAY.
4.
Though the sound stops, the disc will continue to spin. To resume playback press CD
PLAY/PAUSE
button
once again, music will start from the exact position where it was
interrupted.
5.
To stop MP3 disc, press CD STOP
button
once whether MP3 disc is in Play or Pause
mode.
6.
To turn off the unit slide FUNCTION switch to “TAPE (OFF)” position.
Repeat mode
1.
Repeat 1:
When the MODE
button
is pressed once, repeat indicator “
”
will light up; this single track of music will be repeated.
2.
Repeat folder:
When the MODE
button
is pressed twice, “
” and “FOLDER” indicators will be
shown; this specific folder will be played repeatedly.
Remarks:
The folder and track number will be shown every 2 seconds alternatively.
3.
Repeat All:
When the MODE
button
is pressed three times, repeat all
indicator “
” will be shown. The whole disc can be played
continuously.
4.
To cancel repeat function
Press the MODE
button
repeatedly until repeat indicator disappears from LCD
DISPLAY.
Random play mode
This feature allows tracks on the disc to be played in a random order.
1.
During CD stop mode, press the MODE
button
four times;
“
” indicator will be shown on LCD DISPLAY and all music
will be played in random order automatically.
2.
To cancel random play function, press the MODE
button
again, “
” indicator
will disappear from the LCD DISPLAY.
P-11
Program mode
1.
During CD stop mode press the PROGRAM button once. The “PROGRAM” indicator
and number of program to be memorized starts from the first program “
” will
light up and blink continuously. Press the FOLDER button to select your desired
folder; then press CD SKIP/SEARCH FORWARD
"
or BACKWARD
#
button to select
your desired musical track inside this folder, LCD DISPLAY will
show the track number of this specific Folder to be programmed.
Press PROGRAM button once to store this track into memory.
2.
Repeat above procedure until all desired tracks have been programmed.
Remarks:
Whenever FOLDER button is pressed it will always show the last
programmed folder number first to recall your memory.
A total of 20 tracks can be stored into memory. After complete programming, LCD
DISPLAY will show “PROGRAM _ _ _” and blink continuously.
3.
To start programmed playback, press CD PLAY/PAUSE button once; CD play indicator
“
!
”, “PROGRAM” and the track number of the specific folder will light up.
Example
:
Folder # 3, Track # 2.
4.
To check the program you have stored after complete programming, press PROGRAM
once during CD stop mode. The LCD DISPLAY will show “
” and blink
button
continuously. Press FOLDER
button
to read the folder number and press CD
SKIP/SEARCH FORWARD
"
or BACKWARD
#
button
to read the specific track
number of said folder. Press PROGRAM
button
again, LCD DISPLAY will show “
”
and blink continuously. Repeat above procedure to check all programs being stored.
5.
To cancel programmed memory:
!
During CD stop mode press CD STOP button once.
OR
!
Open CD door during CD stop mode.
The “PROGRAM” indicator will disappear from LCD DISPLAY.