P-6
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the Stereo Headphone Jack and adjust the
Volume Control knob accordingly. During the use of a headphone, the speakers are automatically disconnected.
AUX/MP3-IN CONNECTION
1.
Insert the audio cable into the Line Out Jack or Phones Jack on your MP3 Player/iPod. Another ends inserts
into the corresponding AUX/MP3-IN Input Jack on your main unit.
2.
Turn on your main unit and slide the Function Switch to
AUX/MP3-IN
position.
3.
Make sure your device
in component is turned on, and follow your component’s instruction.
4.
To stop this function, simply slide the Function Switch to
TAPE
position.
REMOTE CONTROL
Open the Battery compartment door and insert two pieces "AA" size batteries into the battery compartment with
battery polarity as shown inside the battery compartment.
Point the remote control at the remote sensor. The functions of the buttons on the remote control are same as the
corresponding controls on the main unit.
1 Play/Pause
Button
2 Stop
Button
3 CD/USB
Button
4 Program
Button
5 Mode
Button
6
Folder Up Button
7
Folder Down Button
8
Skip Up Button
9 Skip
Down
Button
10 Battery
Compartment
Note:
Because of none-standardized format definition/production of MP3 CD, playback quality & performance are not
guaranteed.
Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions such as PC
performance, writing software, media ability and etc.