INITIAL SETTINGS
Initial settings page is for you to make your preferred settings
up for your player. Once the initial settings are done they are
retained in the CPU of the player until otherwise modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button.
2. Use the navigation buttons to select the item you want to
modify, setting page with further setting items displayed
shows on the TV screen. Again use navigation buttons to
select and make changes. Press again OK button to
confirm modifications.
3. Use navigation buttons to switch to another setting on the
main setting page.
4. Press SETUP button to exit main setting page.
1. SYSTEM SETUP
1.1 TV SYSTEM -
it is used to select the TV system.
Options: NTSC, PAL, AUTO
Please select this option as per your TV set.
1.2 TV TYPE-
it is used to select the TV scan mode, please
set as per your TV set.
Options:
4:3PS :
Normal Pan & scan mode
4:3LB :
normal Letter box mode
16:9
:
16:9 wide screen mode
1.3 PASSWORD
- input password to unlock the system. The
steps are as follows:
1.3.1 Enter SYSTEM SETUP, select the PASSWORD item by
scrolling the down navigation button, and then press the
right navigation button to select the input box.
1.3.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then
press OK button to confirm. When the password is
changed, you are needed to input the new one to unlock
the system.
1.3.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE
: If wrong password was input in unlock status, the
system will lock.
1.4 RATING -
Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R/ 6R /
7 NC-17 / 8 ADULT
1.5 DEFAULT -
Reset to factory settings.
Options: RESTORE
SYSTEM SETUP
TV SYSTEM
EXIT SETUP
TV TYPE
PASSWORD
RATING
DEFAULT
2. LANGUAGE SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
Page 4
KODAK PICTURE CD / JPEG CD PLAYBACK
Slide show of Kodak Picture CD after being loaded begins
automatically;
Folders of JPEG picture CD after being loaded are displayed
on the TV screen; use the navigation buttons to select the
desired folder and then press OK button to confirm.
The files in this folder are displayed and you can select your
favourable pictures using the up/down navigation buttons and
press OK button to start playback.
Preview of the picture will be displayed while you scroll
across the filenames.
KODAK PICTURE CD / JPEG CD OPERATIONS
1. PLAY MODES
Press REPEAT button during play to change the play modes.
During playback, press STOP to enter preview mode.
2. SKIP TO NEXT/PREVIOUS PICTURE
Press NEXT button to skip to the next picture or PREV
button to the previous picture.
If no key is pressed for a few seconds, it will skip to next
picture automatically.
3. PICTURE ROTATIONS
Press RIGHT and LEFT navigation buttons to rotate the
picture Clockwise and anti-clockwise respectively.
4. PICTURE FLIPS
Press UP navigation button to flip the picture vertically.
Press DOWN navigation button to flip the picture horizontally.
5. PICTURE ZOOM IN/OUT
Press and hold ZOOM/SLOW button continuously ,the picture
zooms in by 2, 3, 4 times or zooms out by 1/2, 1/3, 1/4 the
original size.
Press this button once more when the picture getting 1/4 size
to return to the normal play.
If the picture is enlarged, you may use the navigation buttons
to view blocked parts of the picture.
6. SLIDE SHOW TRANSITION MODES
During slide show playback, press the PROGRAM button
cyclically to select one of the following modes to play.
WIPE TOP
WIPE BOTTOM
WIPE LEFT
WIPE RIGHT
DIAGONAL WIPE LEFT TOP
DIAGONAL WIPE RIGHT TOP
DIAGONAL WIPE LEFT BOTTOM
DIAGONAL WIPE RIGHT BOTTOM
EXTEND FROM CENTER H
EXTEND FROM CENTER V
COMPRESS TO CENTER H
COMPRESS TO CENTER V
WINDOW H
WINDOW V
WIPE FROM EDGE TO CENTER
RANDOM
NONE
TFT ON/OFF
Press TFT ON/OFF button on the main unit to turn on or off
the TFT screen.
BASS ON/OFF
Press BASS ON/OFF button on the main unit to switch bass
sound effect on or off.
PICTURE ADJUSTMENT(FOR THE LCD SCREEN)
Press the ADJUST button once to enter the picture
adjustment mode, and press the CH+/- buttons to select the
item(Brightness,contrast, color, mode and LCD mode), press
ADJUST button to confirm, then use CH+/- to adjust until the
desired effect is reached.