To video input connector (yellow)
To audio input connectors (red, white)
BASIC CONNECTION
—
It is recommended to be connected to a multi-system TV.
—
Ensure that this player and other equipment to be
connected to the unit are in the standby or off mode and
disconnect the AC power cords before commencing
connection.
—
Do not block ventilation holes of any piece of the
equipment and arrange them so that air can circulate freely.
—
Read through the instructions before connecting other
equipment.
—
Ensure that you observe the color coding when connecting
audio, video cables.
Note:
—
During DVD play, the TV volume may be at a lower level
than during TV broadcasts, etc. If this is the case, adjust the
volume to the desired level.
—
If the DVD/VCD/CD player is connected to the TV through a
video cassette recorder, the picture may not be played back
normally with some DVDs. If this is the case, do not
connect the player via the VCR.
To power outlet
AC power cord
OR
Optical digital
audio cable
(optional)
TV
set
Video/audio cable
Coaxial audio cable
(optional)
To optical digital
audio input
connector
To coaxial digital audio
input connector
R L
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
21
22
23
24
25
26
27
28
SELECT
1. FUNCTION button
15. DISPLAY button
2. ADJUST button
16. SETUP button
3. CH+/UP button
17. MUTE button
4. CH-/DOWN button
18. NUMERIC buttons
5. TV MENU button
19. DVD MENU button
6. SUBTITLE button
20. REPEAT 1/ALL&A-B button
7. AUDIO button
21. TITLE button
8. SLOW button
22. OK button
9. STEP button
23. NAVIGATION buttons
10. STOP button
24. PLAY/PAUSE button
11. F.BWD button
25. NEXT button
12. F.FWD button
26. PREV button
13. ANGLE button
27. GOTO button
14. ZOOM button
28. PROGRAM button
14
20
ILLUSTRATION OF THE KEYS ON THE
REMOTE CONTROLLER
CONNECT DVD PLAYER TO OTHER APPLIANCES
Page 2
OPERATIONS
PREPARATION
Connect the speakers properly before Powering on the TV
set, then select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Turn on the player and slide FUNCTION switch on the
main unit to DVD position.
2. Open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray and the playback starts automatically.
5. When a menu screen appears on the TV, move the navigation
buttons or press the numeric buttons to select a preferred
track number, then press OK button to start playback.
ADJUST THE VOLUME
Adjust the VOLUME controller on the main unit to increase
or reduce the volume.
MUTE
Press the MUTE button, the audio output of the main unit will
be shut off, pressing this button again or VOLUME button will
resume the audio output.