Page 6
Program Mode
1. During the CD Stop mode, press the Program Button once and “PROGRAM 01” will start flashing in the LCD display.
Press the CD Skip Up or CD Skip Down button to your desired musical track, the LCD Display will show the appropriate
track number and press Program Button;
2. The selected will store in the memory and the “PROGRAM 02” will start flashing in the LCD display.
3. Repeat above procedure until all desired tracks have been programmed. Up to 20 tracks can be programmed;
4. To start the programmed playback, press the CD Play/Pause Button once;
5. To cancel the programmed play mode, simply open the CD Door.
RECORDING FROM CD PLAYER
1. Slide the Function Switch to "CD" position;
2. Put a CD into the CD compartment with the label on top;
3. Insert a blank cassette into the Cassette compartment and press Pause Button of the cassette deck;
4. Press Record Button and Play Button simultaneously of recording stand-by;
5. Activate the CD player, playing in a desired track as described in the CD Player Operation section. Release the Pause
Button of the cassette deck to start recording;
6. To temporary stop recording, press the Pause Button. To continue recording, press the Pause Button again;
7. Press Stop Button of the cassette deck to stop recording, then stop CD playback by pressing CD Stop Button of the CD
player.
REMOTE CONTROL
Open the Battery Compartment Door and insert two pieces "AA" size batteries into the battery compartment with battery
polarity as shown inside the battery compartment.
Point the remote control at the remote sensor. The functions of the buttons on the remote control are same as the
corresponding controls on the main unit.
1 Play/Pause
Button
2 Stop
Button
3 Program
Button
4 Repeat
Button
5 Skip
6 Skip
7 Battery
Compartment
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the Stereo Headphone Jack and adjust the Volume Control
Knob accordingly. During the use of a headphone, the speakers are automatically disconnected.
