Page 5
Auto Stop System
When the tape runs to its end during playback or recording, the cassette operation will be stopped automatically.
CAUTION:
To avoid damage to the cassette mechanism or to the cassette tape, always press the Stop Button between each
operation
RECORDING FROM THE RADIO
1. Tune to desired radio program as described in the
"
Radio Operation
"
section;
2. Insert a blank cassette tape into the Cassette Compartment;
3. Press the Record Button and the Play Button simultaneously to start recording. With the built-in Automatic Level Control
(ALC), the best recording quality is automatically adjusted. Changing the volume level will not affect the recording;
4. To stop recording temporarily, press the Pause Button. To continue the recording, press the Pause Button once again;
5. Press the Stop Button to stop recording;
6. When the tape runs to its end, the cassette operation will be stopped automatically.
CD OPERATION
Playing CD
Getting Start
NOTE:
Should skipping of tracks occur during CD playing, try turning the volume down. When CD is playing, do not open the
CD Door.
1. Open the CD Door by pressing the CD Open Door Button. Put a CD into the CD Compartment and close the CD Door. Set
the Function Switch to
"
CD
"
position;
2. When the CD Door is closed with a CD inside, the total number of tracks will be shown on the CD LCD Display and it will
go to
"
STOP
"
mode;
3. If the CD Door is not closed or there is no disc inside and it will go to "STOP" mode.
Play/Pause Mode
1. When the Play/Pause Button is pressed during "STOP" mode, the first track will be played. The LCD Display will show the
specific number of tracks played;
2. For interruption while the CD is playing, press the CD Play/Pause Button once. The Play/Pause Indicator will flash
continuously;
3. Though the sound stops, the disc will continue to spin. To re-start playing, press the CD Play/Pause Button once again.
The music will start from the exact position where it was interrupted;
4. To stop the CD, press the CD Stop Button once whether the CD is in Play or Pause mode.
Repeat Mode
REPEAT 1:
When the CD Mode Button is pressed once, the Repeat icon will appear in the LCD display. This single track will
be repeated;
REPEAT ALL:
When the CD Mode Button is pressed twice, the Repeat All icon will appear in the LCD display. The whole disc
will be played continuously;
TO CANCEL THE REPEAT FUNCTION:
Press the CD Mode Button until the Repeat icon disappear in the LCD display.
Skip and Search Mode
1. During Play or Pause mode, when CD Skip Up or CD Skip Down button is pressed once, it will go to the next track or go
back to the beginning of the track;
2. During play mode, when CD Skip Up or CD Skip Down button is pressed and held, it will search the track with audible high
speed forward or backward playback.
