Premier SCR-4710TVD, Instruction Manual

Page: 5 / 65

1. Remove the 2 deck screws as right;
2. Mounting Slide Bracket Housing
;
1
)
Remove the PLASTIC FRAME from the chassis ;
2) Insert the 2 KEY PLATES into the grooves at the both sides of the chassis till
they click; then pulling the two KEY PLATES to remove the chassis from the
Slide Bracket Housing ;
3) Mount the Sliding Bracket Housing in the position of car multi-media system and
bend some tabs of Sliding Bracket Housing to fix it.(see Installation Diagram)
3. Connecting all wires:
1) Remove control panel from chassis as follows:
A. Press the REL button to flip down control panel .
INSTALLATION STEPS
KEY PLATE
PLASTIC FRAME
KEY PLATE
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove
the PLASTIC FRAME of the both sides away, then insert the two KEY PLATES into
left and right sides of chassis as above illustration.
REL button
P-4