Premier Iron-A-Way, Use & Care Manual

Page: 8 / 12

1. Remove the electrical cover that is resting on the bottom storage shelf to expose
the outlet on the bottom of the raceway. Your iron plug and cord will be placed
through the small hole in the shelf, allowing the plug to connect to the outlet.
2. Plug the iron cord into the outlet.
3. Determine a convenient length (approx. 48”) of electric cord and leave this
amount outside the opening in the bottom storage shelf. Use the cord clip on the
underneath side of the shelf to hold in place. Place the remainder of the cord
between the bottom end of the raceway and the top of the storage shelf, covering
this portion by replacing the cord cover.
4. To activate power, turn the timer knob past the 5-minute mark (or press the on/off
rocker switch if your unit has this feature.)
5. Begin ironing after your iron has reached the desired heat setting.
6. When you are finished ironing, turn your timer or switch to the off position.
7. Place the iron in the hot iron storage compartment in an upright position, with the
hot plate facing the inside wall of the cabinet (insulated heat shield).
8. Return the ironing board to an upright position. The automatic disconnect switch will
be depressed and the power will be disconnected from the unit, allowing the iron to
remain plugged into the unit.
Ironing with Your Electrical Features
Models with a Cord Cover
1. Plug the iron cord into the outlet.
2. Determine a convenient length (approx. 48”) of electric cord, then wrap the remaining
cord around the electric cord wrap located underneath the bottom storage shelf.
3. To activate power, turn the timer knob past the 5-minute mark (or press the on/off
rocker switch if your unit has this feature.)
5. Begin ironing after your iron has reached the desired heat setting.
6. When you are finished ironing, turn the timer or switch to the off position.
7. Place the iron in the iron storage compartment in an upright position, with the hot plate
facing the inside wall of the cabinet (insulated heat shield).
8. Return the ironing board to an upright position. The automatic disconnect switch will
be depressed and the power will be disconnect from the unit, allowing the iron to remain
plugged into the unit.
Models with a Cord Wrap
7- IRONING CENTER USE