background image

IRONING TIPS

To prevent excessive wrinkles after laundering garments, use the following ironing tips:

- Always follow recommended laundry instructions attached to individual garments.

- Do not overload the washer or dryer.

- Always wash/dry light and heavy articles separately. Mixing can cause wrinkles in both the 

washing and drying cycles. 

- Keep clothing items spaced in closet and try not to crowd garments after ironing. 

Preventing Excessive Wrinkles in Garments

Ironing Your Garments

- Follow the recommended heat cycles below for each garment type: 

  LOW HEAT:                      MEDIUM HEAT:                            HIGH HEAT:

         Acetates & Acrylics             Silks & Polyesters              Rayons, Nylons, & Cottons

- Use a steam iron or dampen your garments with a spray bottle before ironing.

- Iron clothes on the outside layer of fabric, unless the pattern of fabric requires ironing 

from the inside out (corduroy, embroidery, etc). 

- Begin ironing sections of clothes that hang off the board first, such as sleeves, collars, 

bows, ties, etc, and then move to the body of the articles. 

- Always iron clothes in the length-wise direction. 

- Never iron with quick, jerky motions. Instead, use unhurried, rhythmic motions. Allow the 

heat of the iron to do its work with time and don’t press down hard on the iron. 

- Lift up with each stroke when ironing lightweight materials. Never run the iron back and 

forth over delicate fabrics. 

9 - IRONING TIPS

Summary of Contents for Iron-A-Way













Reviews:

Related manuals for Iron-A-Way