P-15
If the code is wrong, an error message will be prompted on the screen. After selecting a call barring
option, continue to select Activate or Deactivate. The mobile phone will prompt you to input the call
barring code and then contact the network. A moment later, the network will make a response and
send the operation results to the mobile phone.
"
Line switching
: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network
operator.
"
Auto redial
:
Set it to
On
or
Off
to enable or disable auto redial. If you set
Auto redial
to
On
, the
mobile phone will automatically redial the number a moment later if the called party does not reply.
The number of auto redial times can be set to a maximum of 10. In the auto redial period, you
cannot dial other numbers. To end the auto redial process, press the
End
key.
Note
: This function requires support from the network operator to which the SIM card is registered.
"
IP dial
: Activate/deactivate the IP dial function and add/edit IP numbers.
"
Call time reminder
: To set single or circle tone in a call to make you know the time.
"
Answer mode
: Set answer mode as per your need.
Network Settings
Contact the network operator to obtain the following network services:
"
Network selection:
Set Network selection mode to Automatic or Manual. Automatic is
recommended. When Network selection mode is set to Automatic, the mobile phone will prefer the
network where the SIM card is registered. When Network selection mode is set to Manual, you need
to select the network operator's network where the SIM card is registered.
"
Preferred networks:
Select the preferred networks. By default, the network where the current SIM
card is registered will be displayed.
Security Settings
This function provides you with related settings about safety use
"
SIM1 security
!
PIN lock:
To activate PIN lock, you need to input the correct PIN code. If you set PIN lock to On,
you need to input the PIN each time you power on the mobile phone. In the case you input a wrong
PIN for three consecutive times, you need to input the PIN Unblocking Key (PUK). The PUK is used
to unlock and change the locked PIN. To obtain the PUK, contact the network operator.
!
Change PIN:
To change PIN code of SIM card.
!
Change PIN2:
To change PIN2 code of PIN code.
"
Phone security
!
Phone lock:
The function enables you to lock/unlock the phone. Once this function is enabled,
correct password is required when the phone is locked. The password is 4 to 8 digits.
!
Change password:
to change phone password.
"
Auto keypad lock:
The function enables you to lock/unlock the keypad. Setting the auto locking
time that 5s, 30s, 1min or 5mins is available. The keypad will be auto locked with no operation
during the period.
Restore Factory Settings
Use this function to restore factory settings. The preset password is 1234.
Display
Users can access this item to set wallpaper, screen saver, power on/off display, etc.
Organizer
Calendar
Once you enter this menu, there is a monthly-view calendar for you to keep track of important
