Pressure
Pulse
Pressure
Pulse
Pressure
Pulse
Symbol
Measurement
Range
Accuracy
LCD
Indication
Operating
Environment
Storage
Environment
Model No.
Display
Measurement Localization
Measuring Principle
Cuff
Memory Function
Inflation
Power Source
Rapid Air Release
Automatic Power-Off
Main Unit Weight
Deflation
Accessorial Components
0 ~ 299 mmHg (0 ~ 39.9 kPa)
40 ~ 199 Pulses/min
3 Digits Display of mmHg or kPa
3 mmHg (0.4 kPa)
5% of reading
3 Digits Display
Memory/Average/IHB/Heartbeat/Low Battery, etc.
BP-3946
LCD Digital Display
Upper Arm
Oscillometric Method
Memory 90 Sets of Measurement Values
Automatic by Internal Pump
Automatic by Air Valve
4 AA Alkaline Batteries or AC/DC Adapter; D.C. 6V
In 2 Minutes
Automatic by Air Valve
Soft Arm Cuff
Approx. 300g (Batteries not included)
Cuff, Batteries, Instruction Manual
Temperature
Humidity
Temperature
Humidity
Barometric Pressure
10 ~ 40 °C (50 ~ 104 °F)
15 ~ 90%RH (Noncondensing)
-20 ~ 60 °C (-4 ~ 140 °F)
10 ~ 95%RH (Noncondensing)
105 ~ 80 kPa
Specifications
Care and Maintenance
Do not clean the body and cuff with
naphtha, thinner or gasoline etc.
Do not wet the cuff or attempt to
clean the cuff with water.
Store the unit in a clean and dry
location. Do not subject the unit to
extreme hot or cold temperature,
humidity and direct sunlight.
Remove the batteries if the unit will
not be used for 3 months or longer.
Always replace all of the batteries
with new ones at the same time.
Use the unit consistent with the instructions provided in this manual.
Use only authorized parts and accessories.
MEM
SET
MEM
START/STO
P
SYS
mmHg
DIA
mmHg
PUL
/min
naphtha
thinner
gasoline
Maintenance
MEM
SET
MEM
START/STOP
KINGYIELD
SYS
mmHg
DIA
mmHg
PUL
/min
Keep the unit in the storage case
when not in use.
Clean the unit with a soft dry cloth.
Do not use any abrasive or volatile
cleaners.
Never immerse the unit or any
components in water.
Care
※If needed, please use ultraviolet radiation for disinfection.
P-20
P-19
