Premier Tech Aqua
10/20
Ecoflo
®
Polyethylene
–
Installation Guide Ontario
Edition: 2020-06-23
•
Attach the tipping bucket to the central support by inserting the two (2) locking catches into the central
support’s
anchor slots. Bring down the opposite end to make sure the tipping bucket stays in place. Check the
state of the tipping bucket by moving it from left to right to make sure nothing is blocking its movement.
•
Make sure that:
-
The distribution plates are properly installed;
-
The float tree and the pump are correctly positioned (models with integrated pump);
-
The tipping bucket tilts correctly on both sides.
•
Screw in the pump outlet adapters (models with integrated pump). These adapters can be found in the
components box (shipped within the main access of the biofilter). For the outlet, there are available two
adapters in the box of 1” and 1½”.
•
Screw in place the main and the secondary access with the supplied lag screws and place the insulating
boards and lids. Secure the lid of the main access with the four lag screws and the lid of the secondary
access with the two quarter turns. The secondary access lid and insulating board are packaged in the
components box (shipped within the main access of the biofilter).
Outlet adapter
Tank adapter
Outlet pump
pipe
Locking catch
Anchor slots
