Cleaning & Maintenance
SURFACES:
Wash with warm soapy water and a soft sponge. Never use abrasive detergent,
scouring pads, steel wool or solvents on any part of this appliance as this will cause
irreparable damage.
ALUMINIUM GREASE FILTERS:
Wash in the dishwashers or soak the panels in a degreasing agent for an hour, then
rinse off and dry before re-installing.
CHARCOAL FILTERS:
(only in re-circulating model): Charcoal cannot be reused. They must be replaced with
the appropriate types once a year or depending on the frequency of appliance usage.
For this appliance to function effectively, regular maintenance is a must.
Clogged filters restrict airflow and may cause the motor to overheat.
4. Installation
Use suitable bolts to mount the appliance on a secure surface.
The minimum distance between the bench top and the lowest part of the hood must
be not less than 65cm.
The location of the installation must have permanent openings for ventilation.
Regulations concerning the discharge of air have to be fulfilled.
It is strongly recommended that the hood be installed right over the exhaust air from
cooking.
It is better not to install the outlet of the pipe in the wind direction, which can prevent
the exhaust air from flowing backwards.
Fasten the components for the exhaust outlet with screws. To ensure good ejection of
exhaust air, the pipe must not be bended for too many times.
5
REMOVAL OR MODIFICATIONS TO THE APPLIANCE,
ELECTRIC WIRE OR PLUG, VOIDS THE WARRANTY
The four hob elements were used the appliance at most.
Every hood has two fixing screws to firmly fix the hood in its place.
6
Summary of Contents for A83
Page 2: ......