9
6. Troubleshooting
Symptoms
Possible Cause
Action
Doesn’t start
No electrical supply
Check that the main switch is
turned on
Check that the plug is con-
nected
Poor airflow
Aluminum grease filters
clogged
Clean the filters and replace
when dry
Charcoal grease filters
clogged
Replace charcoal filters with
new sets
Motor running but
no airflow
Butterfly valve jammed
Contact technician
Motor cuts after a
few minutes
High temperature safety
device activated
The kitchen is not sufficiently
ventilated
The hood is installed too
near the cooking stove
The hood must be at least
65cm from stove
Strong cooking
smell
Charcoal filters are not
installed
Charcoal filters must be in-
stalled in re-circulating mode
Oil cup missing or not
installed
Remove aluminum filter and
replace oil cup
Aluminium grease filter
saturated
Wash the aluminium grease
filters
Whirring sound
Foreign object in contact
with fan blade
Contact technician
Oil dripping onto
stove
Installation
This appliance must be installed or repaired by a qualified technician only.
It is dangerous to modify any part of this appliance.
The manufacturer declines all responsibility in case of failure to adopt proper safety
measures.
Ensure the location in which this appliance is installed has good, permanent ventila-
tion.
In ducted mode, there must be one or more permanent air inlet. The air collected must
not be discharged into a duct used to blow off smoke from other appliances fed with
electricity.
The distance between the bench to the lower part of the hood must not be less than
65cm.
Use an electrical connector with earth that is correct for your location.
Check that the voltage in your area correspond to the appliance as indicated on the
rating label.
Do not connect the hood to a duct that carries combustion fumes (e.g. fireplace).
During use
This product is designed for household use only and should never be used for com-
mercial applications.
After use, always ensure that all controls are in the "OFF" position.
When frying with a gas flame, take particular care not to allow the oil or grease in the
pan to catch fire.
Cleaning, Maintenance & Service
Clean the grease filters often (at least once monthly). Heavy oil deposits is a fire haz-
ard. Hood surface should be cleaned with soft cloth and non-corrosive detergent.
Important:
Never attempt to repair this appliance by yourself. Always refer to qualified
Service Technicians.
2
Summary of Contents for A83
Page 2: ......