background image

premierpet.com

5

Key Definitions

Fence Transmitter:

 Transmits the radio signal through the boundary wire

Pet Area:

 The area within the warning zone where your pet can roam freely

Warning Zone:

 The outer edge of the pet area where your pet’s receiver collar begins to beep, warning 

him not to go into the static correction zone

Static Correction Zone:

 The zone beyond the warning zone where your pet’s receiver collar will emit a 

static correction, signaling him to return to the pet area

Boundary Width:

 The combination of the warning zone and the static correction zone

Surge Protector:

 Installed with the fence transmitter to protect it from lightning strikes and power surges

Receiver Collar:

 The device that receives the radio signal from the boundary wire

Correction Level Button:

 Adjusts the level of static correction your pet receives in the static 

correction zone

Receiver Indicator Light:

 Indicates the level of correction at which the receiver collar is set. This light 

also serves as the low battery indicator

Contact Points:

 The contacts through which the receiver collar delivers the safe static correction when 

your pet moves into the static correction zone

Power Jack:

 The jack where the power adapter plugs into the fence transmitter. The fence transmitter is 

powered by a standard outlet

Boundary Wire Terminals:

 The terminals where the boundary wires connect to the fence transmitter in 

order to complete a continuous loop

Loop Indicator Light:

 The light that indicates that the boundary wire makes a complete loop, enabling 

the signal to be transmitted

Boundary Width Control:

 The knob that adjusts the width of the warning and static correction zones. 

Note: Adjusting the knob does not change the level of static correction on the receiver collar.

 

Receiver Collar

Battery

Contact Points

Washers

Fence Transmitter

Power Light

Loop 

Indicator 

Light

Boundary 

Wire Terminals

Boundary 

Width 

Control

Power

Jack

Fence

Transmitter

Static

Correction

Zone

Warning

Zone

Static 

Correction Zone

Warning 

Zone

Boundary

Width

Surge

Protector

with Power

Adapter

Summary of Contents for GIG00-16349

























Reviews: