www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Installation Guide
P2642T
Attaching the Mounting Bracket to the Flat Panel
This section presumes that you have read and understood these sections:
●
Selecting the Proper Mounting Hardware
●
Universal Washer Installation
●
Universal Spacer Installation
Do not overtighten the mounting hardware.
Éviter de trop serrer le dispositif de montage.
Lock-it™ Security Barrel Installation (Optional)
Do not overtighten the locking screw.
Please read the following directions to install the security barrel:
1) Remove the locking screw from the mounting bracket.
2) Place the locking screw into and through the security barrel (see illustration below).
3) Re-insert the locking screw and security barrel into the mounting bracket.
4) Tighten the locking screw and security barrel until seated in the mounting tab.
Optional security configurations include:
- PCB-CSL1 (sold separately)
- Padlock (Combination or Keyed; commercially
available)
Lock-It™ Security
Barrel
Locking Screw
Do not thread the locking screw any further once it is even with the
mounting tab (see illustration to the right). Threading the locking screw
any further will prevent you from safely attaching the flat panel to the
wall plate.
Mounting Tab
Éviter d’enfiler davantage la vis de réglage une fois qu’elle parvient au niveau
de la patte de fixation (voir illustration à droite). Le filetage excessif de la vis
de réglage au-delà de ce point gênera le fixage correct de l’écran plat sur la
sablière.
Éviter de trop serrer la vis de blocage.
1) Place your flat panel screen-side down on a soft, flat surface.
2) Identify the number and location of the thread inserts on the back of your flat panel.
3) Align the holes on each mounting bracket with the thread inserts on the back of your
flat panel.
4) Secure each mounting bracket to your flat panel by inserting a minimum of two (2)
screws per bracket.
Page 9