Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 3
IPM-530 Installation Instructions (cont’d)
IPM-530
Swivel Tabletop Installation
➊
Replace the bumpers on the
bottom of the mounting base
with four (4) push-in rivets
(Figure 1).
➋
Determine where you want to
secure the mounting base.
➌
Insert one (1) #8 x 1¼” wood
screw through a bottom screw
hole on the mounting base and
into the table (Figure 2).
➍
Insert the iPad™ frame into the
back plate on the mounting base
(Figure 3).
➎
Rotate the mount to the desired
landscape or portrait position.
➏
Tighten the two (2) pre-installed
M4 x 16mm pan combo screws
on the sides of the back plate.
Figure 1
Figure 2
Push-in rivet
Wood screw
Figure 3
Wood Stud Installation
➊
Determine where you want to
attach the mounting base to the
wood stud.
➋
Insert two (2) #8 x 1¼” wood
screws through the bottom
screw holes on the mounting
base and into the stud
(Figure 1).
➍
Insert the iPad™ frame into the
back plate on the mounting base
(Figure 2).
➎
Rotate the mount to the desired
landscape or portrait position.
➏
Tighten the two (2) pre-installed
M4 x 16mm pan combo screws
on the sides of the back plate.
Wood screw
Figure 1
Figure 2
