Page 2
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
IPM-530
IPM-530 Installation Instructions (cont’d)
Step 5
Are you using the IPM-530 as a
tabletop or wall mount?
If
tabletop mount,
use two (2)
10-32 x
¼” flat Phillips screws
to attach the back plate (pointed
side
up
) to the mounting base
(Figure 1).
If
wall mount,
use two (2)
10-32 x
¼” flat Phillips screws
to attach the back plate (pointed
side
down
) to the mounting base
(Figure 2).
10-32 x ¼” Flat Phillips Screw
Step 4
➊
Adjust the arms on the iPad™
frame
so that the iPad™ fits
snuggly inside the mount (Figure
1).
➋
Tighten the two (2) pre-installed
Phillips screws on the back of
the iPad™ frame to secure the
arms (Figure 2).
Mounting tab on IPM-530
Figure 1
Figure 2
Phillips screws
10-32 x ¼” Flat Phillips Screw
Step 6
Choose one of the following installation options:
•
If freestanding tabletop mount, continue to
Freestanding Tabletop
Installation
below.
•
If swivel tabletop mount, go to
Swivel Tabletop Installation
on page 3.
•
If wood stud installation, go to
Wood Stud Installation
on page 3.
•
If wood surface installation, go to
Wood Surface Installation
on page 4.
Freestanding Tabletop
Installation
➊
Insert the iPad™ frame into
the back plate on the mounting
base.
➋
Rotate the mount to the desired
landscape or portrait position.
➌
Tighten the two (2) pre-installed
M4 x 16mm pan combo screws
on the sides of the back plate.
Figure 1
Figure 2
