www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
It is recommended that the following steps be
performed by two people.
1. Lift the ceiling box from the exposed ceiling frame
work until the ceiling box's outer lip rests against the
bottom of the ceiling framework (Figure1).
2. Adjust the 1/16" braided cable tension, but do not
over tighten.
When adjusting the tension of the weight-bearing
side of the Quick Lock, the 1/16" braided cable must be pulled
through the Quick Lock until the desired
tension is attained.
3. When you have the desired tension, pull the 1/16" braided
cable through the other side of the Quick Lock.
Once the tension has been adjusted, be sure that there is a
minimum of 6" of excess 1/16" braided cable on the non-weight
bearing side of the Quick Lock.
4. Use cutters to remove any remaining 1/16" braided cable
(optional).
1/16" Braided
Cable To Ceiling
Attachment
6" Excess 1/16"
Braided Cable
Quick Lock
Ceiling Framework
If you are installing the GB-AVSTOR4 through a
24" x 48" ceiling tile opening, attach a 24" T-bar frame
(commerically available) in the 24" x 48" ceiling tile frame
for support and place a 2' x 2' ceiling tile adjacent to the
GB-AVSTOR4 (Figure 3 and 4).
24" T-Bar Frame
24" x 48" Ceiling Tile
Opening
The replacement 2' x 2'
ceiling tiles goes here.
Figure 1
Figure 2
Figure 3
Figure 4
2
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
GB-AVSTOR4
