www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Eye Lag Screw
Eye Anchor Bolt
The ceiling box must be secured using the Quick Lock and 1/16" braided cables (supplied).
Ceiling Attachment
Wood Stud Ceiling
1. Determine the mounting location.
2. Use a 1/8" drill bit to pre-drill the mounting holes.
3. Secure the four (4) 1/4" eye lag screws to the
wood stud in the ceiling.
4. Run the open end of the 1/16" braided cable
through the hole in an eye lag screw.
5. Run the open end through the loop.
6. Pull the open end down until the 1/16" braided
cable tightens around the eye lag screw.
7. Repeat steps 4-6 for the remaining three
mounting points.
Concrete Ceiling
1. Determine the mounting location.
2. Use a 1/4" concrete drill bit to drill the mounting
holes.
3. Place the concrete eye anchor bolts into the
pre-drilled holes and gently tap into place using
a rubber mallet or hammer.
4. Run the open end 1/16" braided cable through
the hole in an eye anchor bolt.
5. Run the open end through the loop.
6. Pull the open end down until the braided cable
tightens around the eye anchor bolt.
7. Repeats steps 4-6 for the remaining three
mounting points.
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
GB-AVSTOR4
