7/16”
1/4”
1/4” x 3”
#8 x 1-1/4”
#10
4
5
Once the center height is confirmed at 53.38” between the
upper and lower channels, mark and drill pilot holes for the
#10 plastic anchor. Follow the same procedure as step 4
above to install the lower two mounting channel sections,
ensuring the interlocking tabs are together.
Note: Be sure the upper and lower channels are level with
each other and in line at the same starting point as called
out in the instructions.
Once the mounting pilot holes have been drilled, take the
first 48 in. (1219mm) section of mounting channel and se-
cure it level on the wall with the mounting hardware provid-
ed. Once the first upper channel is secure, follow the same
procedure for the second 48 in. (1219mm) upper channel.
Do not overtighten the screws.
A
:
Make sure the two upper channel sections are locked to-
gether inside the locking tabs provided at the channel ends.
Do NOT tap on the small protruding tabs.
A