53.38
(HOLD DIM)
16.00
16.00
16.00
Display Width
FACTOR
15.250"
Mounting
Distance
Desired
Distance
CL
OPTIONAL POWER BOX
OUTLET LOCATION
OPTIONAL POWER BOX
OUTLET LOCATION
THE FIRST SLOTS MUST
ALWAYS HAVE AN ANCHOR
ON EITHER END IN ANY GIVEN
INSTALLATIONAPPLICATION
ROLLER PLATE
Mounting Distance = Display Width/2 + Desired Distance - 15.25”
WALL STRUCTURE
M8 x 16mm
1/4”
M5 x 10mm
M3 x 8mm
1/4” x 3”
M4 x 5mm
#10
#8 x 1-1/4”
x8
x6
x4
x8
x18
x20
x20
x2
x1
x5
x8
1/8” / 3.25mm
(Wood Only)
7/16”
1
Included components
Required for installation
Note: Prior to installation start, the installer has the option
of concealed power and signal boxes mounted flush on
either the left or right side upper mounting rail end caps. If
power and signal cable are to be run externally to the end
cap, please note provisions have been made to allow for
external “wire mold” channel to be run into the end caps as
well.
Unpack all FPS-300 system components and confirm all
components called out in the supplied parts list are ac-
counted for. With all components laid out select the upper
mounting channel pieces as these will be the first part of the
system to install.
Note: If you are using the optional concealed left or right
side power and signal box sections, install only one side of
the upper track guide along with the power signal box cover
that is opposite of where the power and signal is coming
from. Power and signal cables must run together from either
the left or right side for proper operation of the system.