ECM-3763S
Page 6
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
Align the ECM-3763S threaded coupler with the
threaded end of the 1.5” NPT threaded pipe.
®
Thread the ECM-3763S onto the 1.5” NPT
threaded pipe and rotate the ECM-3763S
coupler clockwise until the coupler is fully
threaded onto the 1.5” NPT threaded pipe.
Step 1
Attaching the ECM-3763S to the Ceiling Adapter
ECM-3763S
A 1.5” NPT threaded pipe must be firmly secured
to the ceiling structure before performing the
following steps.
Minimum four (4) complete turns
The coupler must be threaded onto the 1.5” NPT
threaded pipe a minimum of four (4) complete
turns.
The Pan Combo set screw must be backed out in
order for the 1.5” NPT threaded pipe to attach to
the threaded coupler.
1.
5
” NPT Threaded
Pipe (not included)
Pan Combo Set
Screw
Step 2
Pan Combo
Set Screw
1.
5
” NPT
Threaded
Coupler
Ensure that all connections are secure and tight
before proceeding to the next step.
1.
5
” NPT
Threaded Pipe
(not included)
Screwdriver
Proceed to the
“Selecting the Appropriate
Mounting Hardware”
section.
Once the ECM-3763S has been firmly threaded to the
1.5” NPT threaded pipe, use a screwdriver to tighten the
Pan Combo set screw on the threaded coupler.
