AM80
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 9
Selecting the Mounting Hardware
Selecting the Screws
Insert the Thread Depth Indicator into the thread
inserts found on the bottom or top of the flat panel.
®
Use a pencil to mark the depth of the thread insert
on the Thread Depth Indicator, as shown in
Figure 1.
¯
Insert the Thread Depth Indicator into the remaining
thread inserts to compare and verify their depth.
°
Locate the correct diameter screw for the thread
insert.
The screw length must not bypass the mark, as
shown in Figure 2.
If the screw you selected is longer than the mark
on the Thread Depth Indicator, as shown in
Figure 3, do not use this screw.
±
Test each size of the screws provided.
The correct screws should thread easily into the
mounting point and not pull out when tension is
applied.
Determining Universal Adapter Usage
Does the flat panel have 75/100mm mounting
points?
If yes, you do not need the universal adapter.
Proceed to “Attaching The Flat Panel” on page 14.
If no, you do need the universal adapter.
Proceed to “The Universal Adapter” on page 10.
75/100mm
Mounting
Points
