AM80
Page 16
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Tilt/Pivot Adjustment
The tilt/pivot locking screw comes pre-installed,
allowing you to lock the tilt/pivot viewing angle.
Make any tilt/pivot adjustments to the flat panel to
determine the final viewing angle.
®
Use the
5
/
32
˝ Allen wrench to tighten the tilt/pivot
locking screw.
Tilt/Pivot
Locking Screw
5
/
32
˝ Allen
Wrench
Finish the Installation
Installing the Cover Plate on the Wall Plate
Whether or not you use the universal adapter, the
installation procedure is the same.
Place the wall plate receptacle area of the cover plate
over the top of the wall plate as shown, so that the
entire assembly hangs on the wall plate.
Step 1
Step 2
The locking set screw prevents the cover plate
and flat panel from being lifted off the wall plate.
Use the M3 Allen wrench to tighten the locking set
screw located on the bottom of the wall plate receptacle
area of the cover plate.
Failure to fully tighten the locking set screw may
result in damage to the flat panel.
Locking
Set Screw
M3 Allen
Wrench
