Step 1
Slide the top wing’s “T” Fitting Thumb Screw onto the Internal
Vertical Support Rod. Be sure to tighten the top wing’s “T”
Fitting Thumb Screw to secure the wing to the fuselage. Make
sure the wing is fully seated on the Vertical Support Rod.
(diagram A)
Step 2
Insert the Aluminum Ferrule attatched to the Internal Wing
Strut of the bottom Right Wing through the square opening of
the Main Fuselage Hub. Then insert the bottom Left Wing’s
Internal Wing Strut into the Aluminum Ferrule, which is inside
the channel of the Main Fuselage Hub. (diagram B
)
Step 3
Secure the bottom wings to the fuselage with the Velcro tabs
on both the top and bottom of the Left and Right Wings.
(diagram C)
WindGarden
b y p r e m i e r d e s i g n s
Biplane Spinner
assembly
instructions
Plane Fuselage x 1
Wing x 3
Landing Gear Struts x 2
Spinner Propeller x 1
Landing Gear Wheel Axle x 1
Stabilizer Cross Strut x 1
Ground Stake x 1
Support Pole x 1
B
Bottom View
Main
Fuselage
Hub
Aluminum
Ferrule
Internal Wing
Strut
Internal Wing
Strut
Left Wing
Right Wing
Velcro Tab
Velcro Tab
Main Fuselage
Hub
Fuselage
Velcro
Tab
Velcro
Tab
A
“T” Fitting
Thumb
Screw
Vertical Support Rod
Diagonal
Plastic Fittings
Left Wing
Right Wing
C
Bottom View
Top Wing
Bottom Wings
