background image

User Guide 

P. 4

 

1.

 

With the key in the Ignition switch, turn the key to the 

ON (RUN/IGNITION) 

and then 

OFF 

positions 5 times within 10 seconds. 

2.

 

The Parking Light will flash 3 times indicating the Module is now in Valet Mode.  The 

LED will turn

 ON 

solid. 

To EXIT Valet Mode 

1.

 

With the key in the Ignition switch, turn the key to the 

ON (RUN/IGNITION) 

and then 

OFF 

positions 5 times within 10 seconds. 

2.

 

The Parking Light will flash twice indicating the Module is now out of Valet Mode.  

The LED will turn 

OFF

Remote Valet 

This feature will put your vehicle into Valet Mode using the remote transmitter instead of 
the Valet button as above. 

Note: 

Once the Electronic Valet is activated, the remote starter and Alarm features are 

disabled. 

To put the system 

into 

Valet Mode: 

1.

 

Hold down the 

UNLOCK

 and 

START/STOP

 buttons simultaneously for 3 seconds. 

2.

 

The Parking Lights will flash 3 times.

 

The siren will chirp twice and the LED will come 

ON

.

 

To take the system 

out of 

Valet Mode: 

1.

 

Hold down the 

UNLOCK

 and 

START/STOP

 buttons simultaneously for 3 seconds. 

2.

 

The Parking Lights will flash 2 times.

 

The siren will chirp twice, then pause, then chirp twice again, and the LED will go 

OUT

.

 

Panic Mode 

Safety feature: 

Activate Panic Mode in an emergency situation. 

In an emergency situation, you can activate Panic Mode using the 

LOCK

 or 

UNLOCK

 button. 

This will: 

 

Shut down the engine, 

 

Unlock the doors (if 

UNLOCK

 is 

pressed) 

 

Or lock the door (if 

LOCK

 is 

pressed), 

 

Disarm the Starter Kill and 

 

Activate the siren for 1 minute. 

(See below for a description of the Starter 
Kill.)

 

 

To activate Panic Mode 

 

Press and hold the 

UNLOCK

 button for approximately 3 seconds until the siren starts to 

sound and the parking lights flash: this will unlock the doors before the siren sounds. 

 

Or 

press and hold the 

LOCK

 button for approximately 3 seconds until the siren starts to 

sound and the parking lights flash: this will lock the doors before the siren sounds. 

Panic Mode will automatically shut down after 1 minute. 

Note

To stop Panic Mode before the 1-minute delay, press the 

LOCK

 or 

UNLOCK

 button until 

the siren stops. 

Summary of Contents for System THREE SH











Reviews: