10.
OverDrive Reverb Return
- The reverb return control mixes the reverb effect signal with the
dry signal. At full counterclockwise rotation, the reverb effect is defeated.
11
. Tremolo Speed-
Adjusts the rate of the tremolo circuit
12
. Tremolo Intensity-
Adjusts the amount of tremolo that is being created.
13.
Presence Control
- Adjusts the contour of high-frequency response. The high-frequency
response will increase as you advance the control clockwise.
14.
Stand-by Switch
- Should be i
n the “
Off
” or “stand-by” position when you apply power to the
unit. After a few seco
nds, place the switch in the “
On
” position to use the amplifier. You may
leave the unit “powered up” and place this switch in the “stand-by” position to mute the output.
15.
Indicator Lamp
- This
lamp will illuminate when the power switch is in the “up” position,
indicating the unit is receiving A/C power
Summary of Contents for Two-Rock
Page 1: ...OWNERS MANUAL...
Page 10: ......