5
1.5 Installation of Batteries
Design and specifications may differ somewhat from your remote,
in which case the actual product prevails.
Open the back cover of the remote control.
Install two 7#(AAA)1.5V batteries.
Ensure the polarity of the batteries are correct.
Close the back cover.
Remove the batteries from the remote control
if the remote will not be used for a long time.
If the remote control does not work properly,
please carry out the following checks:
- Check the TV is turned on.
- Check the polarity of the batteries are correct.
- Check the batteries are not drained.
- Check the power supply is normal and that the
power cord is correctly connected.
- Check there are no special fluorescent or neon
lights nearby.
1
2
3
2. Basic Operation
2.1 Built-in Battery Switch
This series of TV model has a switch to control the power supply of the built-in
battery. See the button “BATTERY ON/OFF” on the lower back of TV.
When the switch is turn to “ON” position, to plug the power cord in and connect
the power, the built-in battery can be charged, and when the AC power cord is not
be plugged in or under the condition of no electricity, the battery can supply
power to TV for proper working, and the TV will work in a power-saving mode like
lowering the backlight brightness and reducing the volume of speaker .
