PREMAS® 4.0 Installation and Commissioning Manual
Page 34 / 44
Electrical Work
1.
Connect the plug of the sensor cable with the Magnetostrictive sensor and pull it to the
IoT Box diagram (if required extend it with a small junction box and cable, not part of the
scope of delivery)
2.
Connect the wires to the terminal -X1001 according the connection diagram.
Function
Connector
Pin
Wire code of
system cable
Wire code of
extension cable*
-X1001
Terminal
Signal
2
Brown
AI3
: Signal
GND
3
Black
AI3
: 0V
+V
1
Yelllow
/
green
AI3
: +24v
Screen
4
Screen
Earth
* enter the code of
your wire
Table 7: Electrical connections for elongation measurement
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment must
be adhered to.