Prem-I-Air PMSF09 Series Owner'S Manual Download Page 9

Our Address

Puravent, Adremit Limited, Unit 5a, Commercial Yard,

Settle, North Yorkshire, BD24 9RH

Get In Touch

Call: 

0845 6880112

Email: 

[email protected]

The AIR DIRECTION and SWING buttons will be disabled when the air conditioner is not in 
operation  (including when the TIMER ON is set).
Do not operate the air conditioner for long periods with the air flow direction set downward 
in cooling or dry mode. Otherwise, condensation may occur on the surface of the horizontal 
louver causing moisture to drop on to the floor or on furnishings.
Do not move the horizontal louver manually. Always use the AIR DIRECTION or SWING 
button. If you move this louver manually, it may malfunction during operation. If the louver 
malfunctions, stop the airconditioner once and restart it.
When the air conditioner is started immediately after it was stopped, the horizontal louver 
might not move for approximately 10 seconds.
Open angle of the horizontal louver should not be set too small, as COOLING or HEATING 
performance may be impaired due to too restricted air flow area.
Do not operate unit with horizontal louver in closed position.
When the air conditioner is connected to power (initial power), the horizontal louver may 
generate a sound for 10 seconds, this is a normal operation.

CAUTION

!

7

AUTOMATIC OPERATION

   

When you set the air conditioner in AUTO mode, it will

   automatically select cooling, heating(cooling/heating
   models only), or fan only operation depending on what
   temperature you have selected and the room temperature.

   

The air conditioner will control room temperature

   automatically 

a

round the temperature point set  by you.

   If the AUTO mode is uncomfortable, you can select 
   desired conditions manually.

SLEEP OPERATION

When you push SLEEP button during cooling, heating
or AUTO operation , the air

 conditioner will automatically

 

increase (cooling) or 

decrease (heating) 1    per hour.

The set temperature 

will be steady 2 hours later

The fan speed will be automatically controlled.

DRYING OPERATION

The dry mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or 
fan only. The fan speed is LOW.

Cooling

Cooling

Time

DRYING operation

Room

temperature

set temperature

Cooling

Fan only

Fan only

HOW THE AIR CONDITIONER WORKS

Press Sleep button

1

1

1 hour

1 hour

Set 
Temperature

Cooling

Press Sleep button

1

1

1 hour

1 hour

Set 
Temperature

Heating

Summary of Contents for PMSF09 Series
















Reviews: