Prem-I-Air PMSF09 Series Owner'S Manual Download Page 5

Our Address

Puravent, Adremit Limited, Unit 5a, Commercial Yard,

Settle, North Yorkshire, BD24 9RH

Get In Touch

Call: 

0845 6880112

Email: 

[email protected]

Prior to Operation

Usage

Cleaning and maintenance

Service

Service

1. Contact an installation specialist for installation.
2. Make sure the unit is grounded efficiently.
3. Do not use a damaged or non-standard power cord.
4. Do not share the same outlet with other appliances.
5. Do not use an extension cord.
6. Do not start/stop operation by shutting off  the power supply.

1. Exposure to direct airflow for an extended period of time could be hazardous
    to your health. Do not expose occupants, pets, or plants to direct airflow for 
    extended periods of time. 
2. Due to the possibility of oxygen deficiency, ventilate the room when used
    together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. 
    Preserving precision devices, food, pets, plants, and art objects). Usage in 
    such a manner could harm such property. 

1. Do not touch the metal parts of the unit when removing the filter. Injuries 
    can occur  when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can 
    destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and circuit breaker 
    are turned off. 

For repair and maintenance, contact your authorised service dealer.  
     

3

Operating temperature

Mode

Cooling operation

Heating operation

Drying operation

Temperature

1. If  air  conditioner  is  used outside of the above conditions, certain safety  protection 
    features may come into operation and cause the unit to function  abnormally.
2. Room  relative  humidity less  than  80%. If  the air conditioner operates in excess of this
    figure, the surface of the air conditioner may attract condensation. Please sets the vertical
    air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.

Room temperature

Outdoor temperature

17 C   32 C

18 C    43 C

17 C    30 C

-7 C    24 C

17 C   32 C

18 C    43 C

~

CAUTION:

~

~

~

~

~

Summary of Contents for PMSF09 Series
















Reviews: