20
3)
Fan Operation
a) Plug the Power Cord into the power outlet socket.
b) Turn on the unit by pressing the
ON/OFF
Button on the control panel.
c) Press
the
MODE
Button until “
” appears on the VFD display.
d) Select the fan speed by pressing the
FAN
Button.
NOTE: When the unit is running in fan mode, the exhaust duct is inoperative
and is not required.
4)
Heating Operation
a) Plug the Power Cord into the power outlet socket.
b) Turn on the unit by pressing the
ON/OFF
Button on the control panel.
c) Press
the
MODE
Button until “
“ appears on the VFD display.
d) Press the button
UP
or
DOWN
until the desired room temperature
appears on the VFD. The temperature ranges from 16
o
C-31
o
C.
e) Select the fan speed by pressing the Fan button. It is recommended to
use the low fan
NOTE: When activating the heat pump, the unit will shut off for 3-5 minutes
before starting the heating operation.
For the portable type, when the unit is running on heating mode, stretch out the
air exhaust hose to their full length, and wrap the insulated sleeve around the
hose and secure with the Velcro. Do this before installing the exhaust hose into
the air outlet ports on the back of the unit.
5)
Auto Operation
.
a) Turn on the unit by pressing the
ON/OFF
Button on the control panel.
b) Press
the
MODE
Button until the “
” appears on the VFD display.
c) Select the fan speed by using
FAN
button.
During
AUTO
mode, the unit operates at heating mode when the room
temperature is below 20
o
C. It operates at dehumidifying mode when the
room temperature is between 20
o
C to 26.6
o
C. It operates in cooling
mode when the room temperature is above 26.6
o
C. You may use the
timer with the AUTO mode.