19
OPERATION USING CONTROL PANEL
1)
Cooling Operation
a) If using in mobile mode, ensure that the exhaust duct is correctly
installed.
b) Plug the Power Cord in to the power outlet socket
c) Turn on the unit by pressing the
ON/OFF
Button on the control panel.
d) Press
MODE
Button until “
” appears on the VFD display
e) Press ….
UP
or
DOWN…
until the desired room temperature appears
on the VFD. The temperature ranges from 16
o
C-31
o
C.
f) Select desired fan speed by pressing the
FAN
Button.
NOTE: During hot days, the unit will cool off the room most efficiently by setting
the temperature at the lowest and the fan speed at the highest. Reducing the
length of the exhaust duct and insulating the exhaust duct and keeping direct
sunlight to a minimum will also improve the cooling efficiency.
2)
Dehumidifying Operation
a) If using in mobile mode ensure that the exhaust duct is correctly
installed.
b) Plug the Power Cord into the power outlet socket.
c) Turn on the unit by pressing the
ON/OFF
Button on the control panel.
d) Press
the
MODE
Button until the “
” appears on the VFD display.
NOTE: The unit operates at low fan speed during dehumidifying. The unit
cools room slightly during dehumidification. Keep the windows and the doors
closed to aid the effectiveness of the unit in removing moisture from the room.
The unit will not perform dehumidification when the room temperature is lower
than 61
O
C.