background image

IMPORTANT 

Installer and Users please note: 

These instructions should be read carefully and left with the user of the product 
for future reference. 
 

BEFORE USE 

You must inspect the appliance including its cable for any signs of damage. If the 
product is damaged, DO NOT use it, and contact your supplier immediately. 
 

PRODUCT SAFETY 

  This  appliance  can  be  used  by  children  aged  from  8  years  and  above  

and  persons  with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge if they have been given supervision or instruction 
concerning  use  of  the  appliance  in  a  safe  way  and  understand  the  hazards 
involved.  

  Children shall not play with the appliance.  

  Cleaning  and  user  maintenance  shall  not  be  made  by  children  without 

supervision. 

  Do not use in close proximity to gas appliances 

  Do not use unless correctly installed. 

  Do not cover when in use. 

  Do not use the appliance in locations where paint, petrol or other flammable 

liquids are used or stored. 

  Not suitable for use in boats, caravans or other similar areas.  

  The appliance is fitted with an overload cut-out which will operate if the motor 

overheats or is stalled. If this happens, disconnect from the mains supply 
immediately, and allow the motor to cool down. 

 

SAFETY INSTRUCTIONS 

The appliance you have purchased is a technologically advanced product. To 
obtain the best performance from your unit, read this instruction manual carefully 
and follow the instructions each time you use it. 
 

SAFETY RULES 

SAFETY “MUST NOTS” 

  DO NOT use the appliance with inflammable or toxic liquids, 

or any products which are not compatible with the correct 

operation of the appliance. 

EXPLOSION OR POISONING HAZARD

 

 

DO NOT direct the water jet towards people or animals. 

INJURY HAZARD

 

 

DO NOT direct the water jet towards the unit itself, electrical 

parts or towards other electrical equipment.

 ELECTRIC SHOCK 

HAZARD

 

Summary of Contents for EH1684










Reviews: