background image

3

Ver 1 01/2015

A) ON/OFF switch

Press Button A to turn the humidifier ON and OFF.

B) Warm Mist / Night Light

-1st press:  Warm Mist ON and Night Light OFF
-2nd press:  Cool Mist ON and Night Light ON
-3rd Press:  Cool Mist ON and Night Light OFF
The default setting is Warm Mist ON, Night Light ON, and mist emission HIGH, the humidifier will come
back to default setting after the above 3rd press.

C) Auto Humidistat

Press Button C to activate the automatic humidity function, this maintains the humidity at 50%. When
the humidity level in the room is less than 45%, the humidifier will operate automatically to return the 
humidity to the desired level.

D) Timer setting

Press  Button  D  to  set  the  countdown  timer,  it  can  be  regulated  between  1  and  12  hours  or  for 
continuous operation. The time value will increase in increments of one hour.

E) Humidity setting

Set the desired humidity in % by pressing Button E. The value will increase in increments of 5%. We
recommend a relative humidity of between 40% and 60%. The appliance can be regulated from 40% to
75%. (Setting the humidity figure too high can cause the room to become damp). If the humidity exceeds
the desired setting, the appliance will turn itself off and then restart at 5% below the set level. The 
appliance will not turn itself off if it has been set for continuous operation (“Co”). In continuous mode the
unit will automatically shut down after 20 hours. The desired value is shown while you are making the
selection. After a few seconds, the display automatically switches to the current value.

OPERATING INSTRUCTIONS

Summary of Contents for EH1636








Reviews: