• The supplied remote control allows control of the On/Off, speed and oscillation but in addition the following extra functions
are also available;
•
Timer:
repeatedly pressing the timer button will cycle through the 0.5,1,2,& 4 hour settings allowing a time selection
of between 0.5 & 7.5 hours. At the end of the selected time the fan will stop. For continuous operation do not touch this
button.
•
Mode:
The fan has 3 pre-set modes,
• Normal: for everyday use, and will operate as per the set fan speed.
• Natural: operates to the following pattern depending upon the fan setting:
• Sleep: In this operating mode the fan will operate at the set speed for half an hour then drop to the next
lowest setting for another half an hour then operate at its lowest speed setting till the fan turns off.
• It is normal for the motor to become warm in normal use.
• Unplug the appliance from the mains when not in use.
OPERATION
• Plug the mains lead into a 13 Amp mains socket. If any other appliances are
connected to the same extension lead, make sure that it is rated for the total
power of all appliances connected.
• If connecting via an extension lead, make sure that the lead is rated at 3 Amps
or more, and that it is fully unwound.
• Switch the appliance on at the mains socket.
• Use the On/Speed button to start the fan, initially the fan will operate at low
speed. Press the On/Speed button to choose between Low/Medium and
High Speed
• The swing button allows the unit to oscillate the fan head to cover a greater
area.
• To switch Off push the OFF button.
Remote Control
Onboard Control Panel
3
TIMER
NOR
NAT
4H
SLP
2H
HIG
1H
MED
0.5H
LOW
ON
SPEED
SWING
OFF
MODE
OFF
ON
SPEED
TIMER
SWING
