9
www.pregiseu.com
A brand of
45-OM196-1
Speed Adjustment
Buttons
Length Setting:
There are ten preset length settings. Pressing the length adjustment buttons (Add/Subtract)
will adjust the length accordingly. The length setting is only available when the machine is in
Manual Feed-to-Length Mode or Auto Feed-to-Length Mode. With the length set to
“1” (the lowest setting) the machine will dispense a length of material equivalent to two full
revolutions of the drive roller (approx. 460mm). Each addition to the length setting
increases the material length by another full revolution (approx. 230mm) up to a maximum
of eleven revolutions.
Speed Setting
Length Adjustment
Buttons
Length Setting
Speed Setting:
There are ten preset speed settings. Pressing the button with a picture of a rabbit will
increase the speed setting, and pressing the button with a picture of a tortoise will
decrease the speed setting. The speed setting is shown on the display and can be adjusted
in any of the three operating modes.
