AirSpeed
®
Ascent Operator Manual
Tech Service Hotline: 886-904-6979
Original Instruction
s
November 2020
Copyright Pregis Corporation
9
All Rights Reserved
4.2.2
Removing Film
4.3
Starting the Machine
4.3.1
Initial Startup
Upon startup, the machine will require user interaction to warm up. Once this step is complete, the
machine will be ready to run film.
4.3.2
Running Film
To run film through the machine, first follow all prior steps outlined in
Section 4
. To start the
machine, press the physical or touchscreen Start/Stop button. See
Section 5.2.
Figure 14. Tear the film along a perforation between
the roller and the air channel.
Figure 15. Use the Jog button to pass the remainder
of the film through the machine.
Figure 16. Wake up the machine by pressing the
Wake from Seep Button.
Figure 17. Wait for the heater to warm up. Progress
is displayed on the right side of the screen.
Jog Button
