Pregis AirSpeed Ascent, Operator'S Manual

Page: 17 / 22

AirSpeed
®
Ascent Operator Manual Tech Service Hotline: 886-904-6979 Original Instruction s
November 2020
Copyright Pregis Corporation 11
All Rights Reserved
5.2 Table of Symbols
Symbol Name Description
Sleep/Wake Symbol
Displayed on startup, this symbol indicates
whether the machine is in
Sleep Mode . See Section 4.3 .
Wake from Sleep
Button Use this button to wake the machine from Sleep Mode .
See Section 4.3 .
Progress Bar
Function progress is displayed on the right side of the
screen for various processes, including
Wake from Sleep .
Start/Stop Button
Use this button to Start the machine. While the machine is
running, this turns into a Stop button able to stop the
machine if pressed. See Section 5.1.
Start/Stop Button
(Physical)
The physical Start button performs similarly to the
touchscreen button. It is located near the lower right corner
of the front panel. See
Figure 13 in Section 4.2 .
Jog Indicator and
Button
The Jog button is used to load film. Hold the touchscreen
Start/Stop button for 3 seconds access the Jog feature.
Alternatively, use the physical Jog button.
Jog Button (Physical)
The physical Jog button is used to load film. It is located
near the upper right corner of the front panel.
See
Figure 13 in Section 4.2 .
Back Button
The Back button allows the user to return to the Home
Screen .
Fill Mode Button
This button brings up the Fill Mode menu. Depending
on fill mode, length/time per run can be set be pressing the
Run Time/Length button. See Section 5.3 .
Run Time/Length
Buttons
Once a mode is selected in the Fill Mode menu,
length/time per run can be set by pressing either indicator.
See
Figure 20 in Section 5.3 .
Run Time/Length
Indicator
Once Run Time or Length is selected in the Fill Mode
menu, the appropriate indicator will display on the Home
Screen .