SDI-JC-13D2 rev 8-22-22
page 10 of 14
Configure / Setup Alarms
Parameter Default
Max.
Min.
Goto: Menu > Configure/Setup > Ch.x Setup > Alarm Setup
16
100.0
999999 -999999
Alarm 1 Setpoint
17
5
3600
0
Alarm 1 Delay Sec
18
1.0
99999
0
Alarm 1 Deadband
19
0.0
999999 -999999
Alarm 2 Setpoint
20
5
3600
0
Alarm 2 Delay Sec
21
1.0
99999
0
Alarm 2 Deadband
Configure / Setup Alarm Types
Parameter Default
Max.
Min.
Goto: Menu > Configure/Setup > Ch.x Setup > Alarm Setup > Alarm Types
22
Disabled
HiHi
Disabled
Alarm 1 Type
Disabled, LoLo, Lo, Hi, HiHi
23
Auto
Manual
Auto
Alarm 1 Reset Type
Auto, Manual
24
Disabled
HiHi
Disabled
Alarm 2 Type
Disabled, LoLo, Lo, Hi, HiHi
25
Auto
Manual
Auto
Alarm 2 Reset Type
Auto, Manual
Configure / Setup Totalizer Setup
Parameter Default
Max.
Min.
Goto: Menu > Configure/Setup > Analog Input Setup > mA/Vdc Scaling > Totalizer Setup
NOTE:
None of these Parameters are used for T/C and Thermistor Input Types
26
Disabled Enabled Disabled
Totalizer Option
27
Disabled Enabled Disabled
Zero Button Option
Totalized values can be reset to zero when User presses this button.
28
/Hour
/Day
/Minute
Rate Time Base
/Minute, /Hour, /Day Examples: gpm, use /Minute \ gph, use /Hour \ gal/day, use /Day
29
x1
x1000000
x1
Rate Multiplier
x1 x10,x100,x1000,x10000,x100000,x1000000 Example: 0-5 kscf/hr & x1000, 1 count = 1scf
TotUnits
Totalized Units
User entered text, 8 character max, space permitting, use Upper and Lower case letters
30
0.0
99999.0
0.0
Low Flow Cutoff
Input Rates below this value will not be totalized.
Typically used to prevent false totalization due to Xmtr Zero Calibration drift.
Configure / Setup 4-20 mA Output
Parameter Default
Max. Min.
Goto: Menu > Configure/Setup > Optional I/O > 4-20 Output
31
1
3
1
AOUT 0-1 Channel
Choose which AIN channel is associated with this output
32
0.0
99999.9 -99999.9
AOUT 0-1 4 mA =
This is the scaled Input value for 4 mA output.
33
100.0
99999.9 -99999.9
AOUT 0-1 20 mA =
This is the scaled Input value for 20 mA output.
34
1
3
1
AOUT 0-2 Channel
Choose which AIN channel is associated with this output
35
0.0
99999.9 -99999.9
AOUT 0-2 4 mA =
This is the scaled Input value for 4 mA output.
36
100.0
99999.9 -99999.9
AOUT 0-2 20 mA =
This is the scaled Input value for 20 mA output.