Instructions For Use
Read these Instructions for Use and have a good look at the illustrations
before using the Iron.
For Safe Ironing
Never use the Iron if it is damaged in any way.
Take care, always to switch the Iron off when not in use. Always remove
the plug from the socket and then stand the Iron on its rear side. Take
care that children do not touch the Iron or the main cord.
Never immerse the Iron in water. Don’t do so for cleaning either.
Clean the sole plate of the Iron with a soft cloth before ironing for the first
time.
Check first to see whether ironing instructions are attached to the article
being ironed. Follow these instructions in all cases.
If the fabric consists of various kinds of fibers (for instance cotton with
polyester), you must always select the lowest ironing temperature.
Sort the fabrics, wool with wool, cotton with cotton, etc. Start ironing the
fabrics requiring the lowest temperature and progress to the higher
ones, as the iron heats up quicker than it cools down.
Set the temperature with the thermostat. Then put the plug into the
socket and stand the Iron on its rear side. After the Pilot Lamp goes off
and illuminates again, the temperature is correct and you can start
ironing.
The Pilot Lamp will light up from time to time during ironing. This is not a
problem and you can just continue ironing.
Swivel Cord
Thermostat
Pilot Lamp
Non-Stick Sole Plate
